Why metal makes sense on acreage north of Spokane
The forested rural acreage spread along Hwy 395 north of Spokane gets the kind of winter that wears a roof down fast: deep snowpack, repeated freeze-thaw swings, and the steady drip-and-refreeze cycle that builds ice dams along the eaves. Metal answers all three. Its slick, continuous surface lets snow slide off in sheets instead of sitting and melting in place, and because the panels expand and contract as one piece, they shrug off the thermal stress that splits and cups shingles.
For a Springdale homeowner on a wooded lot, that also means fewer service calls. A properly installed standing-seam roof has no exposed fasteners to back out, no seams to lift in a windstorm coming off the open country, and no organic material for moss to grab onto under the tree canopy.
Standing seam, exposed-fastener, and metal shingle options
We install the full range so the roof fits the house and the budget:
- Standing seam - concealed clips, hidden fasteners, and the cleanest snow-shedding profile. The premium choice for steep-pitch homes and the long haul.
- Exposed-fastener panel - a cost-effective workhorse that suits shops, barns, and outbuildings common on Stevens County small town properties.
- Stamped metal shingles and standing-seam-look profiles - the durability of metal with a more traditional residential appearance.
Every system is paired with the right underlayment, ice-and-water shield at the eaves and valleys, and snow retention hardware where roof runoff threatens walkways or entries.
Built for freeze-thaw, ice dams, and wind
Inland Northwest winters punish a roof at the edges first. We run a self-adhering ice-and-water membrane well past the interior wall line at the eaves, detail the valleys so meltwater never finds a lap, and flash the penetrations to survive expansion and contraction. On lower-slope sections where snow lingers, we add bar or pad-style snow guards so a sudden release doesn't take out gutters or land on a doorway.
Wind matters too. Out on open acreage the panels see real gusts, so we engineer the clip spacing and fastening to the manufacturer's wind ratings rather than a one-size-fits-all approach.
Metal over a tear-off vs. a clean re-roof
Most Springdale metal projects start as a full tear-off down to the deck so we can inspect the sheathing, replace anything soft, and lay a proper moisture barrier. On structurally sound homes a recover is sometimes possible, but with the snow loads up here we almost always recommend starting fresh - it's the only way to guarantee the long warranty life metal is capable of. We'll tell you honestly which path your roof needs after we're up on it. If you're weighing materials, our roof replacement overview lays out how metal compares to architectural shingle on cost and lifespan.
Warranties, workmanship, and what's included
DG Contracting LLC backs every installation with a 15-25 year workmanship warranty on top of the manufacturer's metal coating and finish coverage. When you replace your roof with us, the first a 15-25 year workmanship warranty - which pairs naturally with a metal roof, since you'll want clean drainage to handle the faster runoff. We're licensed and insured in both Washington and Idaho, and flexible financing keeps a fifty-year roof within reach.
As a GAF Master Elite contractor - a certification held by only the top 2 to 3 percent of roofers nationwide - we also carry the documentation and references that matter when you're handing a project to a crew you found along Hwy 395.
Local, family-run, and proven
We're a family-owned company based in Colbert, working the towns north of Spokane since 2013, with a 5.0 rating across 288 Google reviews. Springdale sits squarely in the territory we know best - the small-town lots, the long gravel driveways, and the weather that makes a metal roof worth the investment. Estimates are free, and we'll give you a straight assessment of whether metal is the right call for your home before any commitment.
